LD1640-1660
High Precision Lathe
High Precision Lathe
Model : LD-1640A / LD-1660A
SPECIFICATIONS | METRIC (INCH) | |
Model NO. | 1640A | 1660A |
Swing Over Bed | 400mm (16") | |
Swing Over Cross Slide | 242mm (9-1/2") | |
Swing Over Gap | 552mm (21-3/4") | |
Distance Between Centers | 1000mm (40") | 1500mm (60") |
Bed Width | 260mm (10") | |
Number Of Spindle Speeds | 12 | |
Range Of Spindle Speeds | 50-2000R.P.M. | |
Bore Through Spindle | 55mm (2-3/16") | |
Spindle Nose | D1-6 Camlock | |
Taper Of Spindle Nose | MT 6 | |
Tailstock Quill Taper | MT 4 | |
Tailstock Quill Travel | 110mm (4-3/8") | |
Cross Slide Travel | 200mm (8") | |
Compound Rest Travel | 90mm (3-9/16") | |
Metric Threads | (32 Numbers) 0.4-7.0mm Pitch | |
Inch Threads | (32 Numbers) 4-56TPI | |
Module Threads | (32 Numbers) 0.4-7.0mm Mod. | |
D.P. Threads | (32 Numbers) 8-120 D.P. | |
Longitudinal Feeds | 0.029-0.412mm/rev (0.0017"- 0.0242"/rev) | |
Net Weight(kgs) | 860 | 1020 |
Gross Weight(kgs) | 960 | 1140 |
Packing Dimensions LxWxH | 2083x864x1524mm (82"x34"x60") | 2590x864x1524mm (102"x34"x60") |
Features:
- 1.Bed is made of high tensile cast iron FC250.
- 2.Harden and ground bedways.
- 3.Gears and shafts on headstock are hardened and precisely ground.
- 4.Emergency foot brake is equipped for cutting the power and stopping the machine immediately.
- 5.Open type chip pan designed to remove chip.
- 6.Starting lever with safety device.
- 7.Apron is equipped with an interlock safety device to prevent feeding intergearing on the automatic 8.feed and the half-nut operation.
- 9.Overload safety device is equipped to shut off feeding automatically when the longitudinal or cross 10.feeding is overload or touching with obstacle.
*Please indicate following specifications upon order
- 1.Lead screw and reading dial in inch or metric.
- 2.Left or right apron hand wheel.
- 3.Electrical voltage and cycles.
Standard accessories:
- 1.5HP 3PH main drive motor.
- 2.D1-6 back plate for 8”(200mm) chuck.
- 3.D1-6 back plate for 10”(250mm) chuck.
- 4.MT 4 center.
- 5.Center sleeve (MT6×4).
- 6.4-way tool post.
- 7.Complete electric control unit.
- 8.Change gears.
- 9.1/8HP coolant pump equipment.
- 10.Rear splash guard.
- 11.Rapid foot brake.
- 12.Tool box & kits.
Option accessories:
- 1.Steady rest.
- 2.Follow rest
- 3.Face plate 10”(250mm)
- 4.Drill chuck 1/2” (13mm) w/arbor
- 5.Rolling center MT4
- 6.3-jaw scroll chuck 8”(200mm)
- 7.4-jaw independent chuck 10”(250mm)
- 8.Taper turning attachment.
- 9.Quick change toolpost (with 4 toolholders).
- 10.Single saddle stop.
- 11.4-position saddle stop.
- 12.Chuck guard.
- 13.5C collet closer.
- 14.DRO equipment.
- 15.Work light.