1224GH
Bench Lathe
Bench Lathe
Model : LD-1216GH / LD-1224GH / LD-1236GH / LD-1336GH / LD-1340GH
METRIC (INCH) | |||||
Model No. | 1216GH | 1224GH | 1236GH | 1336GH | 1340GH |
Swing Over Bed | 305mm (12") | 330mm (13") | |||
Swing Over Saddle | 153mm (6") | 165mm (6 1/2") | |||
Swing Over Gap | 445mm (18") | 480mm (19") | |||
Distance Between Centers | 406mm (16") | 610mm (24") | 915mm (36") | 1000mm(40") | |
Bed Width | 190mm (7 1/2") | ||||
Spindle Bore | 40mm (1 9/16") | ||||
Taper Of Spindle Nose | MT 5 | ||||
Taper Of Tailstock Barrel | MT 3 | ||||
Spindle Nose | D 1-4 Camlock | ||||
Travel Of Cross Slide | 170mm (6-3/4") | ||||
Travel Of Top Slide | 90mm (3-1/ 2") | ||||
Travel Of Tailstock Barrel | 100mm (4") | ||||
Number Of Spindle Speeds | 12 | ||||
Range Of Spindle Speeds | 70-1500 R.P.M. | ||||
Number Of Metric Threads | 24 | ||||
Range Of Metric Pitches | 0.25-7mm | ||||
Number Of Inch Threads | 40 | ||||
Range Of Inch Threads | 4-112 T.P.I | ||||
Main Motor | 1.5 HP/ 1PH or 2HP 3PH | ||||
Measurement(Without Stand)1set/case | 1270x760x760mm (50"x30"x30") | 1473x760x760mm (58"x30"x30") | 1780x760x760mm (70"x30"x30") | 1855x760x760mm (73"x30"x30") | |
Net Weight(Kgs) | 260 | 280 | 300 | 310 | 320 |
Features:
- 1.Bed is made of high tensile cast iron FC250.
- 2.Hardened and ground bedways.
- 3.D1-4 camlock spindle.
- 4.Metric or imperial specification depend on customer’s instruction.
*Please indicate following specifications upon order
1.Lead screw and reading dial in inch or metric.
2.Left or right apron hand wheel.
3.Electrical voltage and cycles.
Standard accessories:
- 1.Motor and motor pulley.
- 2.D1-4 back plate for 6”
- 3.D1-4 back plate for 8”
- 4.Center sleeve (MT5 × MT3).
- 5.Center (MT3).
- 6.4-way tool post.
- 7.Change gears.
- 8.Tool box & kits.
Option accessories:
- 1.Steady rest.
- 2.Follow rest.
- 3.Face plate 10”.
- 4.Drill chuck 1/2” (13mm).
- 5.Rolling center (MT3).
- 6.3-jaw scroll chuck 6”(160mm).
- 7.4-jaw independent chuck 8”(200mm).
- 8.Floor stand.
- 9.Coolant pump system.
- 10.Taper turning attachment.
- 11.Quick change toolpost.
- 12.Single saddle stop.
- 13.4-position saddle stop.
- 14.Rear splash guard.
- 15.Chuck guard.
- 16.5C collet closer.
- 17.DRO equipment.
- 18.Work light.