LD1440VS

商品名稱:

High Speed Precision Lathe

詳細介紹:

Model :LD-1440VS/LD-1440TS

Metric (Inch)

Model No.

1440VS

1440TS

Capacity

Swing Over Bed

360mm (14")

Swing Over Gap

520mm (20-3/4")

Swing Over Cross Slide

225mm (8-3/4")

Center Height

180mm (7")

Distance Between Centers

1000mm (40")

Bed

Length

1648mm (65")

Width

230mm (9")

Width Of Gap

195mm (7-5/8")

Main Spindle

Spindle Nose

 D1-4  Camlock

Spindle Bore

40mm (1-1/2")

Taper In Nose

MT 5

Taper In Bush

MT 3

Spindle Speeds

(H)300-2200r.p.m. (L)36-300r.p.m

50-2000r.p.m.(12 Numbers)

Carriage

Cross Slide Travel

180mm (7")

Compound Rest Travel

96mm (3-3/4")

Tailstock

Quill Diameter

40mm (1-9/16")

Quill Travel

100mm (4")

Quill Taper 

MT 3

Threading &Feeding

Leadscrew Diameter

24mm (15/16")

Pitch

4mm

Metric Threads

0.4-7mm/pitch (30 Numbers)

Inch Threads

4-56TPI (32 Numbers)

Longitudinal Feeds

0.0026"-0.0368"rev. 0.066mm-0.935mm/rev

Power

Main Drive Motor

5HP/3PH

Coolant Pump

1/8HP/1PH

Packing Dimensions(LxWxH)

1930x813x1600mm (76"x32"x62")

Weight

N.W.

720kgs

G.W.

820kgs

Features:

  1. 1.Bed is made of high tensile cast iron FC250.
  2. 2.Bed ways are Harden and ground .
  3. 3.Gears is headstock are hardened and ground.
  4. 4.Leadscrew is equipped with torque limit safety device.
  5. 5.Feed rod is equipped with over load safety clutch.
  6. 6.Rapid foot-operated brake.
  7. 7.Starting lever with safety device.
  8. 8.Apron is equipped with an interlock safety device to prevent feeding intergearing on the automatic 9.feed and the half-nut operation.
  9. 10.Overload safety device is equipped to shut off feeding automatically when the longitudinal or cross 11.feeding is overload or touching with obstacle.

 

*Please indicate following specifications upon order

  1. 1.Lead screw and reading dial in inch or metric.
  2. 2.Left or right apron hand wheel.
  3. 3.Electrical voltage and cycles.

 

Standard accessories:

  1. 1.5HP 3PH main drive motor.
  2. 2.D1-6 back plate for 6”(160mm) chuck.
  3. 3.D1-6 back plate for 8”(200mm) chuck.
  4. 4.MT 3 center.
  5. 5.Center sleeve (MT5×3).
  6. 6.4-way tool post.
  7. 7.Complete electric control unit.
  8. 8.Change gears.
  9. 9.1/8HP coolant pump equipment.
  10. 10.Rear splash guard.
  11. 11.Rapid foot brake.
  12. 12.Tool box & kits.

 

Option accessories:

  1. 1.Steady rest.
  2. 2.Follow rest
  3. 3.Face plate 10" (250mm)
  4. 4.Drill chuck 1/2" (13mm) w/arbor
  5. 5.Rolling center MT3
  6. 6.3-jaws scroll chuck 6" (160mm) 3-Jaws scroll 6" chuck
  7. 7.4-jaws independent chuck 8" (200mm) 4-Jaws independent 8" chuck
  8. 8.Taper turning attachment.
  9. 9.Quick change toolpost (with 4 toolholders).
  10. 10.Single saddle stop.
  11. 11.4-positions saddle stop.
  12. 12.Chuck guard.
  13. 13.5C collet closer.
  14. 14.DRO(Digital read out )equipment.
  15. 15.Work light.

更多商品