1324E
High Speed Precision Lathe
High Speed Precision Lathe
Model : LD-1324E / LD-1340E / LD-1440E
SPECIFICATIONS | METRIC (INCH ) | ||
Model NO. | 1324E | 1340E | 1440E |
Swing Over Bed | 330mm (13") | 360mm (14") | |
Swing Over Cross Slide | 195mm (7-5/8") | 225mm (8-3/4") | |
Swing Over Gap |
| 490mm (19-1/4") | 520mm (20-3/4") |
Distance Between Centers | 600mm (24") | 1000mm (40") | |
Bed Width | 190mm (7-9/16") | ||
Number Of Spindle Speeds | 9 | ||
Range Of Spindle Speeds | 82-2000R.P.M. | ||
Bore Through Spindle | 40mm (1-1/2") | ||
Spindle Nose | D1-4 Camlock | ||
Taper Of Spindle Nose | MT 5 | ||
Tailstock Quill Taper | MT 3 | ||
Tailstock Quill Travel | 100mm (4") | ||
Cross Slide Travel | 165mm (6 1/2") | ||
Compound Rest Travel | 100mm (4") | ||
Metric Threads | (30 Numbers) 0.4-7.0mm PITCH | ||
Inch Threads | (32 Numbers) 4-56TPI | ||
Longitudinal Feeds | 12 Nos.(0.068-0.936mm/rev)/16 Nos.(0.0026-0.0638"/rev) | ||
Cross Feeds | 12 Nos.(0.034-0.468mm/rev)/16 Nos.(0.0013-0.0319"/rev) | ||
Net Weight(kgs) | 580 | 600 | 620 |
Gross Weight(kgs) | 660 | 700 | 720 |
Packing Dimensions LxWxH | 1473x762x1473mm(58"x30"x58") | 1855x762x1473mm(73"x30"x58") |
Features:
1.Bed is made of high tensile cast iron FC250.
2.Hardened and ground bedways.
3.Hardened and ground gear in head stock.
4.D1-4 camlock spindle.
5.Metric or imperial specification depend on customer’s instruction.
*Please indicate following specifications upon order
1.Lead screw and reading dial in inch or metric.
2.Left or right apron hand wheel.
3.Electrical voltage and cycles.
Standard accessories:
- 1.Gap bed (1340E/1440E only).
- 2.2HP 1PH or 3HP 3PH main drive motor.
- 3.D1-4 back plate for 6”
- 4.D1-4 back plate for 8”
- 5.Center sleeve (MT5 × MT3).
- 6.Center (MT3).
- 7.4-way tool post.
- 8.Complete electric control unit.
- 9.Change gears.
- 10.Floor stand.
- 11.1/8HP coolant pump equipment.
- 12.Rear splash guard.
- 13.Rapid foot brake.
- 14.Tool box & kits.
Option accessories:
- 1.Steady rest.
- 2.Follow rest
- 3.Face plate 10”
- 4.Drill chuck 1/2” (13mm)
- 5.Rolling center (MT3)
- 6.3-jaw scroll chuck 6”(160mm)
- 7.4-jaw independent chuck 8”(200mm)
- 8.Taper turning attachment.
- 9.Quick change toolpost.
- 10.Single saddle stop.
- 11.4-position saddle stop.
- 12.Chuck guard.
- 13.5C collet closer.
- 14.DRO equipment.
- 15.Work light.