LD1740-LD1740AS
點擊圖片放大商品名稱:
CNC Flat Bed Lathe
CNC Flat Bed Lathe
詳細介紹:
Model : LD-CT1320 / LD-CT1740 / LD-CT1760
CT1320 | CT1740 | CT1760 | |
Swing Over Bed | 320mm | 450mm | |
Swing Over Cross Slide | 180mm | 240mm | |
Distance Between Centers | 500mm | 900mm | 1400mm |
Bed Width | 190mm | 300mm | |
Spindle Speeds | 100-4000rpm | L:50-355rpm H:352-2500rpm | |
Spindle Bore | 40mm | 55mm | |
Spindle Nose | D1-4 Camlock | D1-6 Camlock | |
Taper Of Spindle Bore | MT 5 | MT 6 | |
Tailstock Quill | 40mm | 52mm | |
Quill Taper | MT 3 | MT 4 | |
Quill Travel | 100mm | 150mm | |
Z Axis Ball Screw | ∮25mm x P5 C5 | ∮32mm x P5 C5 | |
X Axis Ball Screw | ∮16mm x P5 C5 | ∮20mm x P5 C5 | |
Main Spindle Motor | 5HP/3.7KW 3PH | 7.5HP/5.5KW 3PH | |
Coolant Pump | 1/8HP 1PH | 1/8HP 1PH | |
Packing Dimensions LxWxH | 1800x1000X1200mm | 2200x1200x1600mm | 2700x1200x1600mm |
Net Weight(kgs) | 700 | 1200 | 1400 |
Gross Weight(kgs) | 800 | 1300 | 1500 |
Standard Accessories:
- 1.X,Z axis limit switch & dog.
- 2.Z axis coupling.
- 3.X axis belt.
- 4.X axis pulley.
- 5.Auto lubrication.
- 6.Tool box & kits.
- 7.MT4×6 sleeve(for CT1740/CT1760)/ MT3×5 sleeve(for CT1320).
- 8.Instruction manual.
- 9.Sheet metal.
- 10.Electric cabinet.
更多商品
CNC Machining Center
Model : LD-M600 / LD-M800 / LD-M1000 / LD-M1200 M600 M800 M1000 Travel X Axis 600mm 800mm 1000mm Y Axis 460mm 600mm Z Axis 520mm 600mm Distance Between Spindle and Table Surface 100-620mm 80-600mm 80-680mm Table Size (L X W) 700x450mm 900x450mm 1120x600mm Max. Load 250kgs 400kgs T-slot 4x16x95mm 5x18x100mm Spindle Taper On Bore BT40 Speed 10000RPM 8000RPM Feed Rate Rapid Traverse (X,Y) 30m/min 24m/min Rapid Traverse (Z) 20m/min 20m/min ATC (Automatic Tool Changer) Magazine Type Genova Tool Magazine Capacity 16 20 MAX. Tool Diameter 120mm/80mm (with adjacent tool) Max.Tool Weight 7kgs Max.Tool Length 200mm Packing Dimensions 220x220x226cm 220x226x226cm 260x246x260cm Net Weight(kgs) 3400 3600 5800 Features: 1.Major casting pieces are meehanite grade cast iron. 2.Structure of column, base, saddle and head are ribs reinforced to ensure the best rigidity. 3.Three axes with linear ways. 4.Counter balanced weight ensures smooth head movement at rapid feed. 5.Rigid spindle balanced with pulley and pre-run for 24 hours to check head rise, noise and vibration 6.before assembled to the headstock. 7.Total enclosed splash guard. Standard Accessories: 1.Full enclosed guard 2.coolant system 3.Cabinet heat exchanger 4.Auto lubrication system 5.Work light 6.Tool box and lits 7.Instruction manual 8.RS232 interface 9.Alarm light 10.Spindle air blast Optional accessories: 1.Chip conveyor 2.Spindle for 10000rpm, 12000rpm 3.4th axis system 4.4th hydraulic tank 5.4th axis motor and driver 6.ATC arm type
Bench Lathe
Model : LD-1216GH / LD-1224GH / LD-1236GH / LD-1336GH / LD-1340GH METRIC (INCH) Model No. 1216GH 1224GH 1236GH 1336GH 1340GH Swing Over Bed 305mm (12") 330mm (13") Swing Over Saddle 153mm (6") 165mm (6 1/2") Swing Over Gap 445mm (18") 480mm (19") Distance Between Centers 406mm (16") 610mm (24") 915mm (36") 1000mm(40") Bed Width 190mm (7 1/2") Spindle Bore 40mm (1 9/16") Taper Of Spindle Nose MT 5 Taper Of Tailstock Barrel MT 3 Spindle Nose D 1-4 Camlock Travel Of Cross Slide 170mm (6-3/4") Travel Of Top Slide 90mm (3-1/ 2") Travel Of Tailstock Barrel 100mm (4") Number Of Spindle Speeds 12 Range Of Spindle Speeds 70-1500 R.P.M. Number Of Metric Threads 24 Range Of Metric Pitches 0.25-7mm Number Of Inch Threads 40 Range Of Inch Threads 4-112 T.P.I Main Motor 1.5 HP/ 1PH or 2HP 3PH Measurement(Without Stand)1set/case 1270x760x760mm (50"x30"x30") 1473x760x760mm (58"x30"x30") 1780x760x760mm (70"x30"x30") 1855x760x760mm (73"x30"x30") Net Weight(Kgs) 260 280 300 310 320 Features: 1.Bed is made of high tensile cast iron FC250. 2.Hardened and ground bedways. 3.D1-4 camlock spindle. 4.Metric or imperial specification depend on customer’s instruction. *Please indicate following specifications upon order 1.Lead screw and reading dial in inch or metric. 2.Left or right apron hand wheel. 3.Electrical voltage and cycles. Standard accessories: 1.Motor and motor pulley. 2.D1-4 back plate for 6” 3.D1-4 back plate for 8” 4.Center sleeve (MT5 × MT3). 5.Center (MT3). 6.4-way tool post. 7.Change gears. 8.Tool box & kits. Option accessories: 1.Steady rest. 2.Follow rest. 3.Face plate 10”. 4.Drill chuck 1/2” (13mm). 5.Rolling center (MT3). 6.3-jaw scroll chuck 6”(160mm). 7.4-jaw independent chuck 8”(200mm). 8.Floor stand. 9.Coolant pump system. 10.Taper turning attachment. 11.Quick change toolpost. 12.Single saddle stop. 13.4-position saddle stop. 14.Rear splash guard. 15.Chuck guard. 16.5C collet closer. 17.DRO equipment. 18.Work light.
High Speed Precision Lathe
Model : LD-1324E / LD-1340E / LD-1440E SPECIFICATIONS METRIC (INCH ) Model NO. 1324E 1340E 1440E Swing Over Bed 330mm (13") 360mm (14") Swing Over Cross Slide 195mm (7-5/8") 225mm (8-3/4") Swing Over Gap 490mm (19-1/4") 520mm (20-3/4") Distance Between Centers 600mm (24") 1000mm (40") Bed Width 190mm (7-9/16") Number Of Spindle Speeds 9 Range Of Spindle Speeds 82-2000R.P.M. Bore Through Spindle 40mm (1-1/2") Spindle Nose D1-4 Camlock Taper Of Spindle Nose MT 5 Tailstock Quill Taper MT 3 Tailstock Quill Travel 100mm (4") Cross Slide Travel 165mm (6 1/2") Compound Rest Travel 100mm (4") Metric Threads (30 Numbers) 0.4-7.0mm PITCH Inch Threads (32 Numbers) 4-56TPI Longitudinal Feeds 12 Nos.(0.068-0.936mm/rev)/16 Nos.(0.0026-0.0638"/rev) Cross Feeds 12 Nos.(0.034-0.468mm/rev)/16 Nos.(0.0013-0.0319"/rev) Net Weight(kgs) 580 600 620 Gross Weight(kgs) 660 700 720 Packing Dimensions LxWxH 1473x762x1473mm(58"x30"x58") 1855x762x1473mm(73"x30"x58") Features: 1.Bed is made of high tensile cast iron FC250. 2.Hardened and ground bedways. 3.Hardened and ground gear in head stock. 4.D1-4 camlock spindle. 5.Metric or imperial specification depend on customer’s instruction. *Please indicate following specifications upon order 1.Lead screw and reading dial in inch or metric. 2.Left or right apron hand wheel. 3.Electrical voltage and cycles. Standard accessories: 1.Gap bed (1340E/1440E only). 2.2HP 1PH or 3HP 3PH main drive motor. 3.D1-4 back plate for 6” 4.D1-4 back plate for 8” 5.Center sleeve (MT5 × MT3). 6.Center (MT3). 7.4-way tool post. 8.Complete electric control unit. 9.Change gears. 10.Floor stand. 11.1/8HP coolant pump equipment. 12.Rear splash guard. 13.Rapid foot brake. 14.Tool box & kits. Option accessories: 1.Steady rest. 2.Follow rest 3.Face plate 10” 4.Drill chuck 1/2” (13mm) 5.Rolling center (MT3) 6.3-jaw scroll chuck 6”(160mm) 7.4-jaw independent chuck 8”(200mm) 8.Taper turning attachment. 9.Quick change toolpost. 10.Single saddle stop. 11.4-position saddle stop. 12.Chuck guard. 13.5C collet closer. 14.DRO equipment. 15.Work light.
High Precision Lathe
Model : LD-1640A / LD-1660A SPECIFICATIONS METRIC (INCH) Model NO. 1640A 1660A Swing Over Bed 400mm (16") Swing Over Cross Slide 242mm (9-1/2") Swing Over Gap 552mm (21-3/4") Distance Between Centers 1000mm (40") 1500mm (60") Bed Width 260mm (10") Number Of Spindle Speeds 12 Range Of Spindle Speeds 50-2000R.P.M. Bore Through Spindle 55mm (2-3/16") Spindle Nose D1-6 Camlock Taper Of Spindle Nose MT 6 Tailstock Quill Taper MT 4 Tailstock Quill Travel 110mm (4-3/8") Cross Slide Travel 200mm (8") Compound Rest Travel 90mm (3-9/16") Metric Threads (32 Numbers) 0.4-7.0mm Pitch Inch Threads (32 Numbers) 4-56TPI Module Threads (32 Numbers) 0.4-7.0mm Mod. D.P. Threads (32 Numbers) 8-120 D.P. Longitudinal Feeds 0.029-0.412mm/rev (0.0017"- 0.0242"/rev) Net Weight(kgs) 860 1020 Gross Weight(kgs) 960 1140 Packing Dimensions LxWxH 2083x864x1524mm (82"x34"x60") 2590x864x1524mm (102"x34"x60") Features: 1.Bed is made of high tensile cast iron FC250. 2.Harden and ground bedways. 3.Gears and shafts on headstock are hardened and precisely ground. 4.Emergency foot brake is equipped for cutting the power and stopping the machine immediately. 5.Open type chip pan designed to remove chip. 6.Starting lever with safety device. 7.Apron is equipped with an interlock safety device to prevent feeding intergearing on the automatic 8.feed and the half-nut operation. 9.Overload safety device is equipped to shut off feeding automatically when the longitudinal or cross 10.feeding is overload or touching with obstacle. *Please indicate following specifications upon order 1.Lead screw and reading dial in inch or metric. 2.Left or right apron hand wheel. 3.Electrical voltage and cycles. Standard accessories: 1.5HP 3PH main drive motor. 2.D1-6 back plate for 8”(200mm) chuck. 3.D1-6 back plate for 10”(250mm) chuck. 4.MT 4 center. 5.Center sleeve (MT6×4). 6.4-way tool post. 7.Complete electric control unit. 8.Change gears. 9.1/8HP coolant pump equipment. 10.Rear splash guard. 11.Rapid foot brake. 12.Tool box & kits. Option accessories: 1.Steady rest. 2.Follow rest 3.Face plate 10”(250mm) 4.Drill chuck 1/2” (13mm) w/arbor 5.Rolling center MT4 6.3-jaw scroll chuck 8”(200mm) 7.4-jaw independent chuck 10”(250mm) 8.Taper turning attachment. 9.Quick change toolpost (with 4 toolholders). 10.Single saddle stop. 11.4-position saddle stop. 12.Chuck guard. 13.5C collet closer. 14.DRO equipment. 15.Work light.
High Speed Precision Lathe
Model :LD-1440VS/LD-1440TS Metric (Inch) Model No. 1440VS 1440TS Capacity Swing Over Bed 360mm (14") Swing Over Gap 520mm (20-3/4") Swing Over Cross Slide 225mm (8-3/4") Center Height 180mm (7") Distance Between Centers 1000mm (40") Bed Length 1648mm (65") Width 230mm (9") Width Of Gap 195mm (7-5/8") Main Spindle Spindle Nose D1-4 Camlock Spindle Bore 40mm (1-1/2") Taper In Nose MT 5 Taper In Bush MT 3 Spindle Speeds (H)300-2200r.p.m. (L)36-300r.p.m 50-2000r.p.m.(12 Numbers) Carriage Cross Slide Travel 180mm (7") Compound Rest Travel 96mm (3-3/4") Tailstock Quill Diameter 40mm (1-9/16") Quill Travel 100mm (4") Quill Taper MT 3 Threading &Feeding Leadscrew Diameter 24mm (15/16") Pitch 4mm Metric Threads 0.4-7mm/pitch (30 Numbers) Inch Threads 4-56TPI (32 Numbers) Longitudinal Feeds 0.0026"-0.0368"rev. 0.066mm-0.935mm/rev Power Main Drive Motor 5HP/3PH Coolant Pump 1/8HP/1PH Packing Dimensions(LxWxH) 1930x813x1600mm (76"x32"x62") Weight N.W. 720kgs G.W. 820kgs Features: 1.Bed is made of high tensile cast iron FC250. 2.Bed ways are Harden and ground . 3.Gears is headstock are hardened and ground. 4.Leadscrew is equipped with torque limit safety device. 5.Feed rod is equipped with over load safety clutch. 6.Rapid foot-operated brake. 7.Starting lever with safety device. 8.Apron is equipped with an interlock safety device to prevent feeding intergearing on the automatic 9.feed and the half-nut operation. 10.Overload safety device is equipped to shut off feeding automatically when the longitudinal or cross 11.feeding is overload or touching with obstacle. *Please indicate following specifications upon order 1.Lead screw and reading dial in inch or metric. 2.Left or right apron hand wheel. 3.Electrical voltage and cycles. Standard accessories: 1.5HP 3PH main drive motor. 2.D1-6 back plate for 6”(160mm) chuck. 3.D1-6 back plate for 8”(200mm) chuck. 4.MT 3 center. 5.Center sleeve (MT5×3). 6.4-way tool post. 7.Complete electric control unit. 8.Change gears. 9.1/8HP coolant pump equipment. 10.Rear splash guard. 11.Rapid foot brake. 12.Tool box & kits. Option accessories: 1.Steady rest. 2.Follow rest 3.Face plate 10" (250mm) 4.Drill chuck 1/2" (13mm) w/arbor 5.Rolling center MT3 6.3-jaws scroll chuck 6" (160mm) 3-Jaws scroll 6" chuck 7.4-jaws independent chuck 8" (200mm) 4-Jaws independent 8" chuck 8.Taper turning attachment. 9.Quick change toolpost (with 4 toolholders). 10.Single saddle stop. 11.4-positions saddle stop. 12.Chuck guard. 13.5C collet closer. 14.DRO(Digital read out )equipment. 15.Work light.
